InvaIT500
 

Back to Product

Features
Ironclad® Tubular Technology Resistance to abuse
Electrolyte level indicator Tower type design
High Acid volume per ampere hour Common Side Venting
Deep cycle design Conforms to IS 13369-1992
Advantages
Very long life Can withstand overcharge better
User friendly Occupies less floor space, totally new look
Acid volume per ampere hour is 30% more than that of ordinary tubular batteries. It acts as a coolant and also ensures very low maintenance Less pollution, environment friendly
Suited for use in areas of frequent power cuts (800 to 1000 cycles of deep discharge as against 300/400 cycles of other batteries) Ensures consistent quality
Application
The next generation Tubular battery designed specially to withstand long and frequent power outages. You can now take advantage of Exide's breakthrough Technology to enjoy full power for more hours with your Inverter - The difference is clear to see !
Technical Specification

Model

Capacity at 270C when discharged at C20 up to 1.75 vpc (1.280 sp. gr)

Dimension (+/-3mm)

Weight
(Kg +/-5%)

Volume of Electrolyte
(1.220 Sp. Gr) Liters

Initial charge Minimum AH input (AH)

Initial Charge of Constant Current (A)

Constant Potential Limiting Current (Amps)

Trickle Charge
(Current in mA)



Length



Width



Height*



Dry



Filied
Start (upto 2.36 vpc) Finish (upto 2.75 vpc)


Min.



Max.
IT500 Super

150 Ah+

500

187

416

40.6

62.6

18

810

21.6

10.8

45

180

720

* The height mentioned is upto terminal top
Initial Charging Information
1. Filling in Specific Gravity 1.220 +/ - 0..005 at 27º C
2. Rest Period 12 hrs
3. Minimum Ah input 810 Ah
4. In order to reduce the charging time , the following routine may be adopted. For IT500 Super, the initial charging current may be 21.6A upto 2.36vpc followed By 10.8A upto 2.75 vpc.

However in both cases, minimum Ah to be given. Under the circumstances, Battery temperature should not exceed 50ºC. In case the temperature exceeds 50ºC Adequate rest to be given till the electrolyte temp. comes to ambient temp. and charging to be continued.
5. Conditions of fully charged
3 consecutive hourly readings of specific gravity and voltage become constant.
Top of charge voltage will e around 16.2V – 16.5V.
All cells should gas freely.
Minimum Ah has been given.
6. Specified gravity of fully charged condition 1.250 +/ - 0.005 at 27º

Normal Recharging Instruction
Recharging through Inverter at constant potential mode of 14.4V with limited current as specified. After battery potential matches 14.4V, the battery should continue in trickle charge made at constant potential of 13.8V.
Statutory Notice
All batteries contain lead, which is harmful for humans and environment. As per statutory requirements, the used battery must be returned to the authorized dealer, manufacturer or at the designated collection centres.

 

 
 
 
 
 
 
 
 
 

Contact Us:


Shop No 45, (FF)
DDA Local Shopping Center (LSC)
Mangla Market,
Adjoining KALKAJI Head Post OFFICE,
Kalkaji, New Delhi, Delhi 110019

Phone : 011-40590665, 41600748
Mobile : 9818615350, 9310215350

Email : info@inverterworld.in
Website : www.exidedelhi.com